This one is so simple, it almost doesn’t warrant a tutorial, but since I had someone ask how I made it, I figured I would include a quick post.
Materials Needed
- 4” Pipe
- ABS 3″ or 4″ ABS Closet Flange
Step 1: Cut a Length of 4″ Pipe
Measure and cut an 18″ length of 4” pipe to serve as a holder for the arrows. I had some leftover pipe from a french drain I dug so that is what I went with.
Step 2: Attach the Flange
Hammer the floor flange onto one end of the pipe to form the base.
Step 3: Flare the End of the Pipe
Evenly heat the other end of the pipe with your heat gun. Using a flared bottle (I used a glass measuring cup), flare the end of the pipe outward.
Still In A DIY Mood
If that was too quick for you, take the next challenge up and build yourself an archery stand.
DIY Archery Stand
Building a 3D and Bag Archery Stand Learn How
Leave a Reply
You must be logged in to post a comment.